======================================
GLASS MANUFACTURER MAIN PRODUCT
======================================
L-type glass straight-line double edging production line
1.This line including two sets of straight-line double edgers, one 90°transfer table and one set of galss Washing&Drying machine.
2.It is used for grinding the four parallel straight lines and arrises of the flat glass. Rough grinding, fine grinding, polish, safe coner and washing&drying can be finished at one time.
3.It features in high precision, high efficiency, safety and stable.
4.The machine adopts PLC control system, frequency converter adjust speed, set parameter through man-machine interface.
5.The glass can be finish at one time processed, simple operation and high automatic. It is the best equitment for the mass production of glass for furniture and decoration.
Glass straight-line double edging production line
Glass straight-line double edging production line is made up of two transfer tables、two glass straight-line double edging machines and one straight auto-shift table. 11 spindles working on each side of glass including rough, fine grinding, polishing and chamfering, which give you a very nice performance for the 4 sides of glass sheet at one run. The production line was designed as simple and convenient operation、high precisions、high efficiency、safety and security. It’s a dedicated device for batch processing furniture and architectural glass.
The straight auto-shift table is the most efficient one at home and abroad currently. There are two rotating modes of it. One is high-efficiency rotating directly for small glass while the other is rotating big glass with mechanical arm.
Input transfer table equipped with float universal table and a row of fixed idler wheels which makes it more convenient to locate the glass sheet. Straight auto-shift table will match into double edging machines and double pencil edging machines’ any speed. At the same time this production line also specially configured with barcode scanning and retrieval functions. Different bar and space pattern represent different information，not only can retrieve the size of glass, but also can call up the relevant information, such as customer’s information, orders, delivery time and so on. All of these will be called up when you scan the bar code. Generally speaking, it is a perfect processing line for helping a well organized glass processing factory to be a more efficient one.
Glass straight-line double pencil edging production line
Glass straight-line double pencil edging production line is made up of two transfer tables、two glass straight-line double pencil edging machines and one straight auto-shift table. 4 spindles working on each side of glass including rough, fine grinding and polishing, which give you a very nice pencil finish for the 4 sides of glass sheet at one run. The production line was designed as simple and convenient operation、high precisions、high efficiency、safety and security. It’s a dedicated device for batch processing furniture and industry glass.
Input transfer table equipped with float universal table and a row of fixed idler wheels which makes it more convenient to locate the glass sheet. Straight auto-shift table will match into double edging machines and double pencil edging machines’ any speed. At the same time this production line also specially configured with barcode scanning and retrieval functions. Different bar and space pattern represent different information，not only can retrieve the size of the glass, but also can call up the relevant information, such as customer’s information, orders, delivery time and so on. All of these will be called up when you scan the bar code. Generally speaking, it is a perfect processing line for helping a well organized glass processing factory to be a more efficient one.
U type glass straight-line double edging production line
Brief description
1. This line including two sets of straight-line double edgers, two 90°transfer tables and one set of galss Washing&Drying machine.
2. It is used for grinding the two parallel straight lines and arrises of the flat glass. Rough grinding, fine grinding, polish, safe coner and washing&drying can be finished at one time.
3. The machine adopts PLC control system, frequency converter adjust speed, set parameter through man-machine interface.
4. It features in high precision, high efficiency, safety and stable. It is the best equitment for the mass production of glass for furniture and decoration.
(★This picture shows the successful case in our Sweden customer’s factory.)
YXM1 Glass shape edging machine
YXM1 Glass Shape Edging Machine is suitable for processing the edge of round
shape, oval shape & other irregular shape of glass sheet with various size and
thickness. It can be process the round & oval shape glass semi-automatically.
Adopts the different wheels to processing different shape like semicircular, flat
edge and OG edge etc. Adopt the cup shape wheel and adjust the angle of
motor can be processing the bevel edge.
Technical parameter
1.Processing thickness: 3~40mm
2.Dia: 100~2200mm
3.Max.width of bevel: 35mm
4.Bevel degree: 0°~45°
5. degree of vacuum should be reached: -0.08MPa~-0.1MPa
6. water pressure: 0.1MPa~0.2MPa
7. Air source pressure: 0.6MPA~0.8MPa
8. Rotating speed of working table: 0.3rpm~3rpm
9. Rotating speed of independent turnplate: 0.7rpm~7rpm
10. Min.incurvature radius: R100mm
11. Max.rotating radius: 1500mm
12. Height of working table: 1100mm
13.Weight: 900KG
14.Power: 3.92KW
15.Size: 1100*1100*1800mm
YM1 Glass Inner&External shape edging machine
YM1 inter &external shape edging machine applies to grind and polish for shaping peripheral edge of circular , ellipse and irregular flat glass , and also applies to semi-automatic grinding for circular and elliptical glass . Using different shaping grinding wheels can obtain the half- round, flat or OG edges of glass.
1. Main technology specification:
Environment temperature： 1℃ ～ 40℃
Relative air humidity： ≤ 90﹪
Applied vacuum degree scope： -0.05 MPa～-0.1 MPa
Water pressure： 0.1 MPa～0.2 MPa
Air supply pressure： 0.6 MPa～0.8 MPa 68L/min
Glass thickness: 3 mm～40 mm
Glass external diameter： φ100 mm～φ1600 mm
Glass internal diameter： φ150 mm～φ600 mm
Maximum radii of curvature： R75mm
Rotation speed of spindle： 2850r/min
Rotation speed of working table： 0.4 r/min～2.0 r/min
Installation power： 4.2ＫW
Total height of the main machine： 1915 mm
Max rotating radii： 960 mm
Height of working table： 1100 mm
Weight： About 700Kg
ZJ130 Glass Horizontal Drilling Machine
1.General description:
1.1ZJ130 Glass drilling machine is a cold processing machine which is easy to drill holes on sheets of glass and is equipped with upper and lower drilling bit.
1.2An automatic cylinder drives the lower-drill bit while the upper bit is operated by manual.
1.3Holes of different sizes can be achieved with bits of different diameters.
1.4 this machine works efficiently, it has low glass damage and is easy to operate.
II. Technical Parameters
1. Hole Diameter: φ5φ220
2. Glass thickness range: 3 ~20 mm
3. Max. size of Processing glass: 2700×2200mm
4. Height of Working Table: 1000mm
5. Distance between drilling center and back column:1300 mm
6. Hole at drilling axis and drilling bit connection end: taper k=60°, screw hole G1/2
7. size: 750×2200×1700mm(L×W×H)
2200×2500×1700mm (with floating working table)
8. Weight: 1200KG (with floating working table)
9. Voltage: 380V/50Hz
10. Power: 4.95Kw(with air compressor 1.5kw)
LZ25 Glass Vertical Drilling Machine
LZ25 glass vertical drilling machine is controlled by computer. In actual operation,
just put the glass on the transmission belt, input drilling position data, press the
start button, the machine will automatically position itself and finish all drilling
operations, and automatically stop when the work is completed. Featuring high
drilling efficiency and accurate position, suitable for the processing of building
glass and furniture glass.
Main technical parameters:
ZM4 Glass straight-line edging machine
ZM4 Glass straight-line edging machine
The 4-spindle ZM4 suitable for processing straight-line edge & 45°arrises of glass sheet with various size and thickness. Rough grinding, fine grinding of flat edge and rough grinding of arris can be finished at one time. The same thickness of flat glass can be continuously processing.
Technical parameter:
A. Processing glass thickness: 3~25mm
B. Angle of arris: 45°
C. Min.size of glass: 80×80m
D. Processing speed: 1.0~5.0m/min
E. Installed power :9.15KW;
G. Dimension : 5800*1100*2500mm
Working condition:
1.3.1Power:AC380V±10% 3 50HZ±2%
1.3.2 Environments temperature:1~40℃
ZM8 Glass straight-line edging machine
ZM8 Glass straight-line edging machine
1.Brief Introduction:
1.1The ZM8 is suitable for processing straight-line edge & 45°arrises of glass sheet with various size and thickness.
1.2. The main base is made of cast iron.
1.3 production speeds is adjusted by step-less motor.
1.4 Input and output conveyor adopt timing belt which can improve the transmission precision.
1.5 It is easy to operate and has good performance.
2.Operation Condition
2.1 Power supply :AC380V±10% 3φ 50HZ±2%
2.2 Environment Temperature : 1~40℃
2.3 R.H:90%
3.Technical Data& Wheel Layout
A. Processing glass thickness: 3~25mm
B. Angle of arris: 45°
C. Min.size of glass: 80×80mm
D. Processing speed: 0.5~4.5m/min
E. Installed power : 16.73kw ;
F. Dimension : 6.6m×1.4m×2.5m
ZM9 Glass straight-line edging machine
ZM9 Glass straight-line edging machine
1.General description
1.1ZM9 is suitable for processing straight-line edge & 45°arrises of glass sheet with various size and thickness.
1.2 The main base is made of cast iron.
1.3 glass thicknesses is adjusted by a servomotor and showed on a digital display.
1.4. A special design of the in-feed section for controlling the desired amount of glass removal without adjusting each spindle individually.
1.5 Independent felt wheel and the cerium water recirculation system make the flat edge more shining.
1.6Input and output conveyor adopt timing belt which can improve the transmission precision.
1.7 It is easy to operate and has good performance.
1.2 Model Explanation
ZM9 9spindles totally: 5spindles for the straight-line edge (adopt the independent wool felt wheel), 2pieces of spindle for front and back arris each.
1.3 Operation Condition
1.3.1 Power supply :AC380V±10% 3φ 50HZ±2%
1.3.2 Environment :Temperature : 1~40℃
1.3.3 R.H: 90%
1.4.Technical Data
A. Processing glass thickness: 3-25mm
B. Angle of arris: 45°
C. Min.size of glass: 80mm×80mm
D. Processing speed: 0.5~4.5m/min
E. Installed power :19.08KW;
F. Dimension : 7000×1400×2500mm
ZM9B Glass straight-line edging machine
ZM9B GLASS STRAIGHT-LINE EDGING MACHINE
A. General description
1. ZM9B is suitable for processing straight-line edge & 45°arrises on glass.
2. A special design of the in-feed section for controlling the grinding amount of glass without adjusting each spindle individually.
3. Indepent wool felt wheel and the cerium water recirculation system make the flat edge more shining.
4. Motor is placed outside of the processing zone and power( rotation) goes through a high precision transmission unit to the spindle wheels. This design can keep
the motor away form water and make sure its long term performance.
5. Input and output conveyors adopt timing belt which can improve the stability of transmission.
6. Speed is adjusted by frequency inverter; PLC with pneumatic polishing
B.Technical Parameter
1.Min. processing size: 80×80mm
2.Processing thickness: 3-25mm
3.Processing speed: 1.2-6.0(0.8-5.5 variable frequency)m/min
4.Weight: 3800kg
5.Power: 19.08kw
6.Size: 7000mm×1400mm×2500mm
7.Spindle quantity: 9pcs
ZM9W Glass straight-line edging machine
A. General description
1.ZM9W is suitable for processing straight-line edge & 45°arrises on glass.
2.A special design of the in-feed section for controlling the grinding amount of glass without adjusting each spindle individually.
3. Indepent wool felt wheel and the cerium water recirculation system make the flat edge more shining.
4.With ABB spindle motors and the conveyor system running on ball bearing units, this machine has a much stronger loading and delivering capacity, thus it is able to
process mini piece and extremely thick piece with high precision and good water-proofing.
5. Input and output conveyors adopt timing belt which can improve the stability of transmission.
6.Speed is adjusted by frequency inverter; PLC with pneumatic polishing.
B.Technical Parameter
1.Min. processing size: 40×40mm
2.Processing thickness: 3-30mm
3.Processing speed: 0.5-5m/min
4.Weight: 4200kg
5.Power: 19.08kw
6.Size: 7820mm×1400mm×2850mm
7.Spindle quantity: 9pcs
ZM11 Glass straight-line edging machine
I. General description:
1. ZM11 is suitable for processing straight-line edge & 45° arrises on glass. Rough, fine grinding and polishing on glass flat edge and arrises can be finished at one time.
2. A special design of the in-feed section for controlling the grinding amount of glass without adjusting each spindle individually.
3. Input and output conveyors adopt timing belt which can improve the stability of transmission.
4. Speed is adjusted by frequency inverter or stepless speed variator.
5. PLC with pneumatic polishing.
6. 11 spindles totally: 5 for the straight-line edge, 3 for front arris and 3 for back arris.
II. Technical Data
1. Processing glass thickness: 3-25mm
2. Angle of arris: 45 degree
3. Min.size of glass: 80mm*80mm
4. Processing speed: 1.2-6.0m/min(variator), 0.8-5.5m/min (frequency inverter)
5. Installed power 19.08KW
6. Occupation of land: 7m*1.4m*2.5m
ZM9J Glass flat edger& variable miter machine
1. Brief Introduction:
1.1 This machine is able to grind and polish the miter angle on glass, with bottom edge polishing and rear seaming all at the same time.
1.2 The control system uses a Mitsubishi PLC control unit.
1.3 Input and output conveyor adopt timing belt which can improve the transmission precision.
1.4 The processed glass surface is very bright and smooth, approaching the original glass surface.
1.5 The mitering angle is from 0 to 60 degree.
2. Technical Parameter
1 Processing glass thickness: 3~28mm
2 Miter angle: 0°~60°
3 Min size processing glass: 80mm×80mm
4 Processing speed: 0.6~5.8m/min
5 Installation power: 20.3KW
6 Dimension: 7800mm (length) ×1400mm (width) ×2500m (height)
ZM11J Glass flat edger& variable miter machine1
1. Brief Introduction:
1.1 This machine is able to grind and polish the miter angle on glass, with bottom edge polishing and rear seaming all at the same time.
1.2 The control system uses a Mitsubishi PLC control unit.
1.3 Input and output conveyor adopt timing belt which can improve the transmission precision.
1.4 The processed glass surface is very bright and smooth, approaching the original glass surface.
1.5 The mitering angle is from 0 to 60 degree.
2. Technical Parameter
1 Processing glass thickness: 3~25mm
2 Miter angle: 0°~60°
3 Min size processing glass: 80mm×80mm
4 Processing speed: 0.6~5.8m/min
5 Installation power: 23.3KW
6 Dimension: 7.92m (length) ×1.4m (width) ×2.5m (height)
ZM4Yglass straight-line pencil edging machine
1.Brief Introduction
1.1 ZM4Y can process pencil/OG edging edges of different glass thickness with different shape wheels.
1.2 Rough grinding, fine grinding and polishing of the pencil edge can be finished at one time.
1.3 Same thickness of glass sheet can be process continually.
1.4 It is suitable for rough peocessing before tempering and other further processing.
2.Technical Parameter
2.1 Min. processing size:80*80mm
2.2 Processing thickness:3~19mm
2.3 Processing speed:1.2~6.0m/min
2.4 Weight:2000KG
2.5 Power:10.55KW
2.6 Size:5800*1100*2500mm
2.7 Spindle quantity:4pcs
ZM7Y Glass straight-line pencil edging machine
1.Brief Introduction
1.1ZM7Y can process pencil/OG edging edges of different glass thickness with different shape wheels.
1.2Rough grinding, fine grinding and polishing of the pencil edge can be finished at one time.
1.3 Same thickness of glass sheet can be process continually.
1.4The brightness of pencil edge will be close to the original glass after polished.
1.5 this machine is easy to operate and has good performance.
2 working condition
1.2.1powerAC380V±10% 3φ 50HZ±2%
1.2.2 Environment temperature: 1~40℃
1.2.3air relative humidity90%.
3.Technical Parameter & Wheels Disposal
2.1technical parameter
1 processing glass thickness : 3～15mm
2 Min. size processing glass：80mm×800mm
3 Processing speed：0.54～5m/min
4 Installation power：15.93KW
5 dimension：6.6m(length) ×1.1m(width) ×2.5m(height)
ZM11J Glass flat edger& variable miter machine2
1.Brief introduction
1.The processing of arris,bottom edge and miter edge of glass can be finished at one time.
2.Input and output conveyors adopt timing belt which can improve the stability of transmission.
3.The processed glass is as bright as the original.
4.Different options:Digital display , PLC Control.
2. Technical Parameter
1 Processing glass thickness: 3~25mm
2 Miter angle: 0°~60°
3 Min size processing glass: 80mm×80mm
4 Processing speed: 0.6~5.8/min
5 Installation power: 23.3KW
6 dimension: 7.92(length) ×1.4m (width) ×2.5m (height)
XM251 glass straight-line beveling machine
XM251 is suitable for processing bevel & bottom edge of glass sheet with various
size and thickness. The function of digital display processing thickness, angle and
remaining thickness. Brightness of edge as clear as the glass itself after polished.
Operation Condition
1 Power supply :AC380V±10% 3φ 50HZ±2%；
2 Environment Temperature : 1℃~40℃；
3 R.H:＜90%
Technical Data& Wheel Layout
Technical Data
XM351 glass straight-line beveling machine
1. Brief Introduction:
1.1This machine is designed for grinding and polishing a bevel edge, with bottom round edger of glass with different size and thickness.
1.2Rough grinding, fine grinding, polishing of bevel and grinding of bottom edge can be completed in one time.
1.3Processing thickness, angle and remaining thickness appears on digital display.
1.4. The processing speed is adjustable with a step-less motor which offers a wide range of speed selection.
1.4 Input and output conveyor adopt timing belt which can improve the transmission precision.
1.5 The grinding wheels are indirectly connected to the motor by a belt to reduce vibration.
1.6 This machine features high efficiency and precision, stable quality, easy operation and low wear.
2.Technical Parameter
Processing speed (m/min):0.83~4.1
Min. glass size (mm):120*120
Glass Thickness (a):3~19
Remain thickness (b): ≥1.5
Max. bevel width : 40mm
Bevel angle:3~30°
Size of whole machine L×B×H:8250×1250×2550mm
Weight: 4500KG
Power: 22.83KW
XM351A glass straight-line beveling machine
XM351A straight line beveling machine are used for grinding bevel and bottom edge of glass with different size and thickness. Rough grinding, fine grinding, polishing of bevel and grinding of bottom edge can be completed in one time. It is easy to adjust the feeding of motor in the all and the one and beveling angle while glass thickness is being changed. Same thickness of glass sheet can be process continually. The brightness of finished surface will be almost the same as glass itself.
Technical Parameter
Min.processing size: 30*30mm
Processing thickness: 3~19mm
Processing speed: 0.8~4.0m/min
Max.width of bevel: 40mm
Bevel degree: 3°~45°
Weight: 4300kg
Power: 21.0kw
Main body size: 4966*1225*1620mm
XM371 Glass straight line
XM371 Glass straight line beveling machine are used for grinding bevel and bottom edge of glass with different size and thickness. Rough grinding, fine grinding, polishing of bevel and grinding of bottom edge can be completed in one time.Same thickness of glass sheet can be process continually. The brightness of finished surface will be almost the same as glass itself.This machine has 11 spindles. It is adopts directly transmission. all motors using ABB brand.
Technical Parameter
Min.processing size:120*120mm
Processing thickness:3~19mm
Processing speed:0.83~4.1m/min
Max.width of bevel:40mm
Bevel degree:3°~30°
Weight:5500kg
Power:25.21kw
XM363A glass straight-line beveling machine
A. General description
1. Rough grinding, fine grinding, polishing of beveling edge, grinding of bottom edge and front arrise can be completed at one time.
2. The processing speed is adjustable with variator which offers a wide range of speed selection;
3. Input and output conveyors adopt timing belt which can improve the stability of transmission;
4. The grinding wheels are connected to the motors directly, which is convenient to adjust and maintain.
5. Rear beam can be adjusted up and down which is suitable for processing small pieces of glass.
B.Technical Parameter
1.Min. processing size: 25×25mm
2.Processing thickness: 3-19mm
3.Processing speed: 0.83-4.1m/min
4.Max.widh of bevel: 40mm
5.Bevel degree: 3-45°
6.Weight: 5000kg
7.Power: 28kw
8.Size: 8865mm×1250mm×2550mm
9.Spindle quantity: 12pcs
QX12 Glass washer&drier
The processing speed is adjusted by variable motor with horizontal structure ,four pairs of brushers and three pairs of sponge rollers make the performance of machine are reliable. The temperature of hot-air can be set in advance. Different designing meets customers requirements.
2.Technical parameter
Max. size:1100*2000mm
Min. size:100*150mm
Processing thickness:3~15mm
Processing speed:0.7~3.5m/min
Brusher: 4pairs
Sponge roller: 3pairs
Power:8KW
Dimension:3400(L)*1600(W)*1020(H)
Weight:800KG
The processing speed is adjusted by variable motor with horizontal structure ,four pairs of brushrs and three pairs of sponge rollers make the performance of machine reliable. The temperature of hot-air can be set in advance. Different design meets customers＇ requirements.
2.Technical parameter
Max. size: 1500*2100mm
Min. size: 150*150mm
Processing thickness: 3~15mm
Processing speed: 0.7-3.5m/min
Brusher: 4pairs
Sponge roller: 3pairs
Power: 10KW
Dimension: 4000(L)*2000(W)*1020(H)
Weight:900KG
QX25Glass washer&drier
1.QX25 Washer & Drier adopts horizontal structure and is used for cleaning and drying flat glass.
2.It is made up of 3 pairs of brush.
3.The washing brush are adjusted by electric motor, Digital display.
4.Technical parameter :
Max processing size(width): 2500mm
Min processing size: 350*350mm
Processing thickness: 3~30mm
Weight: 4000KG
Power: 23KW
Dimension: 7300*2860*3200mm
QX26 Glass washer&drier
QX26 Glass washer&drier
1. Brief Introduction:
QX26glass washer & drier adopt horizontal configuration, the flat glass placed on the conveyor roller, passing in-feed section, washing section, drier section, and out-feed section. Glass washing and drying machine is used for cleaning and air-drying of flat glass panes. There are various types available for different glass, float, coating and low-E glass. Washing and drying sections can be elevated or lowered as a whole with PLC. Only in this way will come off satisfactorily.
2. Technical parameter
3. Features:
3.1. The high-powered washer is used primarily with manufacturing facilities for
Automobile safety glass, laminated construction glass, mirror and nickel-plate glass.
3.2. Adopt washing is done with four pair of cylinder brushes. (Two pair of rough & fine brushes.)
3.3. Drying is done with high power blower dryer and is equipped with adjust air knife.
3.4. The air resistant sections of the unit are soundproofed.
3.5. This machines drive roll spinning transmission is achieved by utilizing chain wheel helical gear.
3.6. The face of unit can be lift 450mm vertically, allowing easy inspection and repair.
3.7. The water tank is the unit is equipped with an electric heater to self-adjusting water temperature.
3.8. The section of the unit that comes in contact with water is made of stainless steel to prevent corrosion
SM8 Glass straight-line double edging machine
SM8 is available in processing glass with thickness 3-12mm, which is produced in 8spindles (4 peripheral wheels per side) rough, fine grinding; polishing can be finished at a time. Adopt PLC for controlling. The SM8 are also suitable for small production batches.
Mainly parameter:
Dimension of the whole machine (L*W*H) (mm):3270*3240*1900
Working table height (mm): 850
The Min. area of processing glass (mm2): 150*150
Processing glass width (mm): 150~1500
Processing glass thickness (mm): 3~19
Processing glass Diagonal error (mm):2m*2m≤1
Processing glass parallelism error (mm) ≤0.5/2m
The speed of transmission of processing glass (M/Min): 0.5-4.5M/Min.
(According to the thickness of glass to adjust)
Power (KW): 21.7
Voltage (V): 380
Frequency (Hz): 50
Air pressure (MPA):0.4-0.8
Weight (Kg):3500
SM8Y Glass double pencil edging machine
1.Brief introduction:
SM8Y is available in processing glass with thickness 3-19mm, which is produced in 8spindles (4 peripheral wheels per side) rough, fine grinding; polishing can be finished at a time. Adopt PLC for controlling. The SM8Y are also suitable for small production batches.
2. Technical Parameter
Dimension of the whole machine (L*W*H) (mm):3270*3240*1900
Working table height (mm): 850
The Min. area of processing glass (mm2): 150*150
Processing glass width (mm): 150~1500
Processing glass thickness (mm): 3~19
Processing glass Diagonal error (mm):2m*2m≤1
Processing glass parallelism error (mm) ≤0.5/2m
The speed of transmission of processing glass (M/Min): 0.5-4.5M/Min.
(According to the thickness of glass to adjust)
Power (KW): 21.7
Voltage (V): 380
Frequency (Hz): 50
Air pressure (MPA):0.4~0.8
Weight (Kg):3500
SM20 Glass straight-line double edging machine
1.General description:
SM2025 Glass straight-line double edging machine is suitable for grinding two parallel straight-line edge of flat glass, rough, fine and polishing at one time, its feature of high precision, efficiency and secure .the lathe bed use the double straight-line guide rail and ball-bearings, the drive is smooth and reliable. The product adopts the PLC control, speed control by transducer. Set parameter via the intelligent interface. Finish to work at one time, the operation is easy and convenient.
SM2215/25/30/40 available in different models(from1500mm to 4000mm width),each of which is produced in 22 spindles(11spindles per side with safety corner cutting)
SM2025G Glass straight-line double edging machine
1.This kind of double edging machines belong to No.1 in China (from equipped and design), and with highly automatism. And quality is stable.
2. From the No.1 to No.5 adopt stepping motor to drive. Instead of hand. It will be more precision and stability.
3. The main transmission drove by double servo motor , timing belt to synchronize
4. Adopt one pc of automatic oil pump to lubricating guide rail thread, and two pcs of manual oil pump to lubricating slide board.
5. All plugs adopt aviation plugs, stainless steel water tank, and water circulation system.
6.All spindles motors adopt ABB motors.
7. The side press rollers droved by cylinder.
8.It features in high precision, high efficiency, safety and stable. The machine adopts PLC control system, frequency converter adjust speed, set parameter through
human-machine interface. The glass can be finish at one time processed, simple operation and highly automatic. It is the best equipment for the mass production of
glass for furniture and decoration.
SDM1015 Glass sand belt grinding machine
Glass sand belt grinding machine is specialized in grinding arris of flat glass. Especially suitable for grinding edger before tempering.
I. General description:
SDM1015 is convenient to operate and specialized in grinding arris of flat glass, especially suitable for grinding edge of door or window glass before tempering.
II. Technical Specifications:
1. Installed power: 3.04KW
2. Max size of glass: 1000×1500mm
3. Glass thickness range (mm): 3-25
4. Sand belt（mm）（2pieces）：GXK51 P120 width 80×1360mm
5. Weight: 250KG
6. Dimension (mm): 1300×1100×1400
PS1500 Automatic glass sandblasting machine
1.General description
1.1The machine has full-automatic and manual functions, equipped with 3 automatically guns and 1 manual gun,
1.2 The nozzles of guns are made of special material which can increase using life.
2.Technical parameter
The sandblasting speed is 12~15m2/h.
The min.processing size:300*300mm
The max.processing size:1500*3000mm
The size:1900*1900*2300mm
Power: 3.5KW
Weight: 950KG
======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Glass Double edger series Product
Glass edger series Product
Glass Variable Miter Series
Glass Beveling Series
Glass Washer&Drier Series
Glass Drilling series
Glass shape edging Series
Glass sandblasting machine
======================================
GLASS MANUFACTURER CONTACT INFO
======================================
GUANGDONG ENKONG MACHINERY CO., LTD.
Xinda Industrial Zone, Sanzhou Lunjiao Str., Shunde Dist., Foshan City, Guangdong, China.
Tel:0086-757-27756688
Fax:0086-757-28636022
Website:http://www.enkong.com
======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Guangdong ENKONG Machinery Co., Ltd. is specialized in developing, researching and manufacturing of glass machines. More than 20 years of professional research and developing production skills has brought us a series of glass deep-processing machinery to meet the different needs of customers, as a result we earned widespread praise and trust from all the customers.
ENKONG provides series of glass machines such as glass double edging machine/line, glass washing machine, glass edger, pencil (round) edging machine, vertical/horizontal drilling machine, glass beveling machine, glass miter machine, glass shape edging machine, inner & external edging machine, glass sandblasting machine and sand belt grinding machine.
As an innovator of glass machinery, ENKONG will continue to pursue further development from a higher perspective, to set an example to the industry and build up an everlasting
If you are looking for any glass products in China, or need any help of glass(specially laminated glass, smart glass) in China, just send an email to [
hello@helloglass.com ] , and you will get the answers of what you need in 24 hours. To learn more, please go to
www.HelloGlass.com .
