PVC Window Machine Cutting Machine Aluminum Window Machine Aluminum Spacer I.G Line

======================================
GLASS MANUFACTURER MAIN PRODUCT                                 
======================================

HYSHWFK4-1800X300

Mainly used for colored PVC and coating profiles’ four corner seamlessly welding, with smooth upper and lower surface.
Composed four heads, fixed column, movable column, frame, linear guide, pneumatic system, auto output, pushing section, CNC/Program parts.
By adjusting the limit bolt of the movable sliding base, it can accomplish normal welding with welding seam adjustable, by adding welding plate, it can accomplish multilayer welding. High performance pneumatic parts, linear guide system with the characteristic of easy maintenance and long using life.
Easy operation control system with friendly used surface, and stable CNC System.
Module design for the heads, with high rigidity and strength, which enables more stable for the machine.
Adopts advanced parallel welding technologies and special synchronous structure.

CNC Double Precision Mitre Saw–HYLSJK05-500X4500

Features:

•Used for PVC profiles cutting, automatic 45 ~90 degree cutting angle, one time cutting several pieces of profiles.
•Machine guide and head feeding adopted liner bearing system, Alu-profiles cuttable by change the cutting saw.
•Install cutting angle device ( between 45 and 90 degree) according to the customer demand.
Technical Parameters:

•Power supply:                    380V/50Hz

•Air pressure:                      0.5~0.8(Mpa)

•Input Power:                       5.9kw

•Air consumption:                150L/min

•Angle:                                   45 , 90

•Cutting Height:                  120mm

•Cutting Width:                    320mm

•Cutting Length:                  460~4500(mm)

•Saw Blade diameter:        500mm

•Overall dimensions:         5850x1400x1600(mm)

•Weight:                                1500kg

Four-Head Welding Machine(Seamless)–HYSWFH4-180X3000

Features:

•Used for colored PVC window welding. The corners of welded windows have no seam.
•Processes all kinds of colored profile, welds without seams, cleans top, bottom and outer welding tumors at one time. Smooth and clean welded seam.
•Simultaneous press welding techonlogy with high welding intensity.
•Processes single or double layers welding with cutters and fixtures.
•Special,  reasonable and stable structure for the whole machine with reliable operation.

HYDM-01-80 End Router(A)

Features:

•Used for PVC profile end milling.
•Used for special-shaped screw-connected transom profile end milling.
•Pneumatic clamping and manual feeding,capable of end milling different profoles with different sections by changing to different cutters.
Technical Parameters

•Power supply                                  380V/50Hz

•Air pressure                                    0.4-0.6(MPa)

•Air consumption                             30L/Min

•Input power                                      0.8Kw

•Routing cutting diameter                Ф160mm

•Weight                                              150Kg

•Overall dimensions                         700X580X1540(mm)

Welding Machine (Seamless)

Features:

•Used for colored PVC window welding. The corners of welded windows have no seam.
•Produces all kinds of colored profile,welds without seams.cleans top,bottom and outer welding tumors at one time,smooth and clean welded seam.
•Simultaneous press welding technology with high welding intensity.
•Produces single or double layers welding with cutters and fixtures.
•Special,reasonable and stable structure for the whole machine with reliable operation.
•PLC control system,high quality electrical parts with reliable and convenient performance.
Technical Parameters：

•Power supply                                        220V/60Hz

•Air pressure                                          0.5-0.8Mpa

•Air consumption                                   100L/Min

•Input power                                            2.4kW

•Environment temperature                    20~40(℃)

•Min. welding length                               350mm

•Max. welding length                              3000mm

•Max. welding height                             180mm

•Max. welding width                               120mm

•Overall dimensions                               4100×1500×800 (mm)

HYSLJ-120 Vertical Cutting Center

Features:

•Used for ±45°and 90°cutting of plastic profiles . 
•Composed of cutting section, feeding section, clamping section, auto unloading section and so on.
•Completes cutting process automatically.
•Cutting without waste, greatly saves profiles.Technical parameters:
•Power supply                                     380V/60Hz

•Air pressure                                       0.4-0.7(Mpa)

•Air consumption                                200L/Min

•Input power                                         5.25Kw

•Feeding speed                                  Vmax=70m/Min

•Max cutting height                             120mm

•Max cutting width                               120mm

•Saw blade diameter                          Ф450mm

•Overall dimensions (with feeder)     1000x1420x2000mm(LxWxH) 

HYSF-200 Double Axis Copying Router

Features:

•Used for routing holes and slots in horizontal and vertical diretions.
•Pneumatic clamping,  high speed milling and automatic cooling.
Technical Parameters:

•Power supply                                     380V/50Hz

•Air pressure                                       0.4~0.6(Mpa)

•Air consumption                                30L/Min

•Total power                                       1.85kw

•Copy  range:                        Vertical    90X290(mm)

                                                  Horizontal                                  300X100(mm)

•Weight                                                250Kg

•Overall dimensions                          1000X1150X1500(mm)

HYSC-01 Lock Hole Slot Process Machine

Features:

•Used for milling holes for handle installation.
•Composed of three-hole drillers and copy router, pneumatic clamping and atomatic cooling .
•One-pass clamping, can complete two processes and achieve drilling three holes in the horizontal direction and replicate routing in the vertical direction.
Technical Parameters:

•Power supply                       380V/50Hz

•Air pressure                         0.4~0.6(Mpa)

•Air consumption                   30L/Min

•Input power                           1.85Kw

•Weight                                   300kg

•Overall dimensions              1000X1300X1500(mm)  

HYVQ-120 V Notch Cleaning Machine

Features:

•Used for cleaning V-shape welded seam or welded seam of cross transom.
•Pneumatic clamping, complete one-pass V-shape welded seam cleaning or cross transom cleaning on two surfaces.
Technical Parameters:

•Power Supply:                                 380V/50HZ

•Air pressure:                                    0.4~0.6(Mpa)

•Air consumption:                             150L/min

•Process height:                               120mm

•Process width:                                 120mm

•Cleaning seam length:                   10mm

•Overall dimensions:                        860x670x1250(mm)

•Weight:                                               300KG

HYDX-01 Multi-function Single Head Router

Features:

•Used for  alu-pvc door-window slot and hole milling. 
•Complete one-pass routing of two drain slots and pneumatic balance slots of various profiles.
•Process various pulley slots, lock hole slot, hardware component slots and others with hole duplicating function.     
•PLC control, complete routing drain slots in two different directions through one-pass clamping.  Efficiency is two times as much as double-axis drain slot router.     
•Upper milling machine head adjusts freely at 0°~45° to route drain slots at various angles.
Technical Parameters:

•Power supply                          220V/50Hz

•Air pressure                            0.4~0.8(Mpa)

•Air consumption                      50L/Min

•Input power                             1.2kw

•Slot depth                                40mm

•Slot depth                                4~5(mm) 

•Slot length                               10~50(mm)

•Weight                                      500Kg

•Overall dimensions               900x900x1860(mm)

HYDX-02 Multi-function Double Head Router

Features:

•Used for  PVC door-window slot and hole milling. 
•Complete one-pass the routing of four drain slots and other slots on various profiles.
•Processes  various pulley slots, lock hole slots, hardware component slots and others with slot and hole duplicating function .
•PLC control, completing  routing of drain slots in two different directions through one-pass clamping.  Efficiency is four or five times as much as double axis drain slot router.
•Upper milling head adjusts freely from 0°~45° to accomodate drain slot routing at  various angles.     
Technical parameters:

•Power supply                     220V/50Hz

•Air pressure                       0.4~0.6Mpa

•Air consumption                50L/Min

•Input power                        2Kw

•Slot depth                          40mm

•Slot width                           4-5mm 

•Slot length                          10-50(mm)

•Weight                                1000Kg

•Overall dimension             800X4000X1800(mm) 

HYSH(2+2)-130-3500 Horizontal Double-four-head Welding Machine

Features:

•Used for  PVC door-window  welding.
•Welding four corners at one time, single and double transom, cross trasom and special angles. Possess all fuctions of four, three-, two-, one-head welding machines. Four heads can work simultaneously, indvidually or in combination.
•PLC control, pneumatic drive with high reliability.
•Semi-automaic window unloading system, simple operation with low labor intensity.
Technical Parameters:

•Power supply                                  220V/50Hz

•Air pressure                                    0.4~0.6Mpa

•Air consumption                             300L/Min

•Input power                                      6.2Kw

•Welding range(one-pass)             400×750(mm)   3000×3500(mm)

•Welding range(not one-pass)        400~4500(mm)

•Welding height                                20~130(mm) 

•Welding width                                 120mm

•Weight                                              4000Kg

•Overall dimensions                         4500x4000x1800(mm)

HYSH(3+3)-130-3500 Horizontal Double-six-head Welding Machine

Features:

•Used for PVC door-window welding .
•Welding six corners at one time, single and double tansom, cross transom and special angles. Processes all funcions of four-, three-, two-, one-head welding machines. Six heads can work simultaneously, individually or in combination.
•PLC control, pneumatic drive with high reliability.
•Semi-automatic window unloading system, simple operation with low labor intensity.
Technical parameters: 

◦Power supply                                           220V/50Hz

◦Air pressure                                             0.4~0.6Mpa

◦Air consumption                                       300L/Min

◦Input power                                               6.2Kw

◦Welding range(one pass)                      400×750(mm) 3000×3500(mm)

◦Welding range(not one pass)                400~3500(mm)

◦Welding height                                         20~130 (mm)

◦Welding width                                          120 (mm) 

◦Weight                                                       4000Kg 

◦Overall dimensions                                 4500x4000x1800 (mm)

HYSH2-130-3500 Two-head Welding Machine

Features:

•Used for  PVC door-window welding.
•Welding two-point, one point, transom, cross-transom and special angles. Two heads can work simultaneously, individually or in combination.
•Protection guards. •PLC control, pneumatic drive with high reliability. Technical parameters:
•Power supply                     220V/50Hz

•Air pressure                       0.4~0.6(Mpa)

•Air consumption                100L/Min

•Input power                         2.2Kw

•Welding range                   400~3500(mm)

•Welding height                  20~130(mm)

•Welding width                   120mm

•Weight                               1600Kg

•Overall dimensions           4000x1800x850(mm)

HYSH3-130-3500 Three-head Welding Machine

Features:

•Welding three-point, two or one corner, transom,cross transom and special angles. Three heads can work simultaneously, individually or in combintion.
•PLC control, pneumatic drive with high reliability.

Technical Parameters:

•Power supply                    220V/50Hz

•Air pressure                      0.4~0.6(Mpa)

•Air consumption               150L/Min

•Input power                        3.3Kw

•Welding range                  400~3500(mm)

•Welding height                  20~130(mm)

•Welding width                   120(mm)

HYSH4-130-3500 Four-head Welding Machine

Features:

•Used for PVC door-window  welding.
•Welding four three two or one corner ,transom, cross-transom and special angles.Four heads can work simultaneously, individually or in combination.
•PLC control, pneumatic drive with high reliability.
Technical Parameters

•Power supply                         220V/50Hz

•Air pressure                           0.4~0.6(Mpa)

•Air consumption                    200L/Min

•Input power                            4.4Kw

•Welding range                       400~4500(mm)

•Welding height                       20~130(mm)

•Welding width                        120mm

•Weight                                    2200Kg

•Overall dimensions               5000x1800x850(mm)

HYSH4T-130-4500/HYSH4T-200-4500 Four-head Welding Machine

Features:

•Uesd for PVC door-window welding.
•Welding four, three, two or one corner, transom, cross transom and special angles. Four heads can work simultaneously, individually or in combination.
•Protection guards.
•PLC control, pneumatic drive with high reliability.
Technical Parameters:

•Power supply                      220V/50Hz

•Air pressure                        0.4-0.6(MPa)

•Air consumption                  200L/Min

•Input power                          4.4kW

•Welding range                    400-4500(mm)

•Welding height                    20-200(mm)

•Welding width                     120mm

•Weight                                  2200Kg

•Overall dimensions             5000x1800x850(mm)

HYSHKG4-1800×3000 Horizontal Four-point Welding Machine

Features:

•Mainly used for multiplayer welding
•The two upper clamps prevent the finished window from misplacing when multiplayer welding.
•The pneumatic component and linear pairing element feature high precision, easy maintenance and long performance life.
•Easy operation control components, friendly visual interface and stable CNC system.
•This machine adopts modularized desigh, whose rigidity and intensity have a great improvement. So function of the whole machine becomes more stable.
•The machine adopts advanced parallel welding and unique synchronous structure.
•The machine feature large welding scope, high angle intensity, high precision finished window and high auto.
Technical Parameters:

•Power supply                                       220V/50Hz

•Air pressure                                          0.5-0.8Mpa

•Air consumption                                   200L/Min

•Input power                                           11kW

•Welding height                                      25~260 (mm)

•Welding width                                        0~150(mm)

•Welding range(LxW)                            600×400(mm)~3000×1800(mm)

•Welding space range                           0~3 (mm)

•Overall dimensions                               4600×3500×1500 (mm)

•Weight                                                   2000kg

HYLJKS02-120 CNC Vertical Cutting Centre

Features:
•High precision: three fixed saw blades.No adjustment needed for 45°and 90°cuts and no adjustment error; no dry running for saw blades. Air -liquid conventor driven  device avoids crawling of air cylinder drive and assures stable running.•High efficiency : Computer controlled system sets process requests. Servo system drives automatic feeding, cutting and unloading. Vertical and reciprocating cutting has no dry cutting and its efficiency  is two times greater than that of double mitre saw.•High security : Fully closed structure for safe and stable operation.•High profile saving ratio :Computer optimized process syestem.•Special mechanical device can achieve the best optimum cutting, have two stub bar cutting, and save 20%-30% profiles compared with double mitre saw. Automatic loading and unloading system can save0%-70% manual work compared with double mitre saw.•Servo motor, spindle drive motor and main electrical parts adapt to Japanese,Geman and  Italian brands.
Technical Parameters:

•Power supply                                     380V/50Hz

•Air pressure                                       0.4-0.8(Mpa)

•Air consumption                                200L/Min

•Input power                                         5.25Kw

•Feeding speed                                  Vmax=70m/Min

•Max cutting height                             120mm

•Max cutting width                               120mm

•Saw blade diameter                          Ф450mm

•Overall dimensions (with feeder)      1000x1420x2000mm(LxWxH) 

HYSHQX4-2000 CNC Welding and Corner-cleaning Producing line

Features:

•HYSHQX4-2000 Automatic welding and corner-cleaning production line is made up of one CNC multi-layer four point welding machine, automatic feeding device I, Auotmatic supporting device, automatice feeding device II, two CNC double-head cleaning machines, auxiliary manipulator and stock stop device.
•This line can achieve automatic welding, cleaning and feeding of rectangle windows in enormous quantities.
•This line adopts import CNC drive system, which features easy operation, friendly inferface, stable system, energy-efficient and high degree of automation.
•The welding machine can weld two or four layers PVC profiles, large welding scope and high working efficiency.
•Excellent technology of the welding machine fully ensures the high intensity angles and consistency of finished windows when multilayer welding.
•Modularity design of welding heads ensures the high structure intensity, rigidity and stable function.
•The welding heads are equipped with two upper clamps in order to avoid upper and lower surface misplace and ensure the high planeness of the finished windows.
•The profile fixtures can satisfy the locating weld of different profile.
•Automatic drawing mechanism.
•Two CNC double head cleaning machines achieve four corners omni-directional cleaning. Servo motor drive brings about high speed cleaning.
•Each cleaning head is equipped with eight tools, which can fully satisfy multi-level cleaning requirement over one hundred kinds of profile.
•Auxiliary manipulator finishes the movement from welding to cleaning.
•The total line is horizontal disposition, which features excellent design, consistent process.

Technical parameters:

•Power supply                                            380V/50HZ

•Input power                                               17.2kw

•Rotating speed                                        3000~12000(r/min)

•Air Pressure                                              0.5~0.8MPA

•Max.welding height                                  320    

•Max.welding width                                    120mm

•Welding range                                          400x400mm       1800X3000mm

•Cleaning height                                        20~120mm

HYLSJ03-450×5000 Double Mitre Saw

Features:

•Automatic 45-90°cutting angle change
•One time four pieces of profiles cutting available (height of the profile should be less than 60mm)
•Machine guide and head feeding adopted linear bearing system
•Automatic machine head brake
•Reasonable structure and high processing precision
•Digital display the profile cutting length and quantity
•With head fine adjusting device
 

Technical Parameter:   

• Power Supply                                     380V 60Hz three-phase，four-wire

•Cutting Motor Power                         3kW (1.5kW×2)

•Cutting Motor Rotational Speed     3300 r/min

•Operation Air Pressure                    0.5～0.8MPa

•Air Consumption                               30L/min

•Max. Cutting Length                          5000mm     

•Min. Cutting Length                          430mm

•Cutting Range                                   230×90mm (width×height)；120×105mm (width×height)

•Cutting Angle                                     45°and 90°

•Cutter Feeding Speed                     0～3 m/min (Stepless speed regulating)

•Saw Blade Specification                φ457×4×φ25.4

•Overall Dimension     &nbsp